Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I connect the 6 wires coming out to the ceiling to the 3 wires from the fan?
[ 3 Answers ]
I have two switches on two different walls. So there are six wires ( 2 black, 2 white, 2 bare) coming out of the ceiling. I purchased the Hunter Stratford II Model 20582 ceiling fan with light. How do I connect the six wires coming out to the ceiling to the three wires from the fan? Do I...
Connect ceiling fan wires to ZE268S6 pull chain switch
[ 2 Answers ]
I ordered a new pull chain switch from Hunter and I want to install it myself. It's configured a bit differently than the original. The switch has 4 slots on the side like the original (Well Tec) and also 4 small round holes on the top. Can someone tell me where and how to connect the fan...
How do I connect the wires on a new pull chain switch on a ceiling fan?
[ 1 Answers ]
I have a Heritage Model H42UL (05 2001) ceiling fan that had the fan switch removed before I acquired the fan. Wire colors for the switch are Black, Orange, & from the capacitor, Yellow & Purple. Which wire goes to which slot on a new switch?
Ceiling fan pull chain switch with 6 wires
[ 3 Answers ]
Our ceiling fan switch clicks but the fan does not go on. When I opened the housing, I saw that there was 6 wires, 2 of which were white. One of the white wire was not connected, it could have caused the fan to stop working (?). I do not know where this white wire should be connected to as all...
Ceiling Fan Dual Switch - Wires don't match up
[ 2 Answers ]
Hi there! I just intalled a harbor breeze ceiling fan, and followed the wiring instructions specific to having both the fan and the lights controlled by switches, as opposed to a chain. I then purchased a "Cooper 4 Speed Fan/Light Dual Control" switch and am stuck with two questions that I... View more questions Search
|