Ask Experts Questions for FREE Help !
Ask
    angelfly's Avatar
    angelfly Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2012, 10:17 AM
    Rheem power glow
    My rheem water heater glow plug come on. But the burner only stay light for a second or two

Check out some similar questions!

I have trane XE80 and when I power up the unit the glow stick works but [ 0 Answers ]

The furnace ignites sometime and sometimes it doesn't. I tested the voltage on the gas vaulve and when it does light it is 240 and when it does not light it reads Zero volts. Can anyone help >Number Removed< Vince cell phone

Ford F-250 7.3 Power stroke glow plugs [ 6 Answers ]

:confused: How do I change the glow plugs in my 1999 Ford F-250, 7.3 Power Stoke?

7.3 power stroke glow controler how do I check [ 1 Answers ]

I don't think my glow plugs are working at all. When cold it starts without a problem. When plugged in it starts without a problem. But when left for several hours in the cold, it is extremely hard to start and sometimes it won't start. Is there any way to insure the glow plugs are getting power,...

Low power to glow bar [ 1 Answers ]

Have a goodman furnace that had a bad board I replaced the board but now there is only 14 volts to the glow bar and there should be 110. Could this be a ground problem or bad wiring

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.