Ask Experts Questions for FREE Help !
Ask
    brian446's Avatar
    brian446 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 26, 2008, 07:03 AM
    Low power to glow bar
    Have a goodman furnace that had a bad board I replaced the board but now there is only 14 volts to the glow bar and there should be 110. Could this be a ground problem or bad wiring
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 26, 2008, 07:38 AM
    could this be a ground problem or bad wiring

    Yes it could unless you got a bad board from the supplier.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ford F-250 7.3 Power stroke glow plugs [ 6 Answers ]

:confused: How do I change the glow plugs in my 1999 Ford F-250, 7.3 Power Stoke?

Glow plugs [ 1 Answers ]

Hi I have a 1997 ford power stroke and I am replacing the glow plugs. I have the valve covers off and the electrical contact off and there is a small square plate how does that come off.

No Ignitor Glow [ 8 Answers ]

Not sure the brand.. When I have the thermostat call for heat the vent blower and the blower both come on and there is no glow.. I have tested and bypassed the limit switches and that doesn't fix the problem. Now the diagnoses light flashes 4 times which is supposed to mean that there is an open...

No glow [ 2 Answers ]

I have a pitbull\rottweiler he is 5mo. His coat is not shinning the way I think it should.

View more questions Search