Ask Experts Questions for FREE Help !
Ask
    ldkinsey's Avatar
    ldkinsey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2009, 04:59 AM
    7.3 power stroke glow controler how do I check
    I don't think my glow plugs are working at all. When cold it starts without a problem. When plugged in it starts without a problem. But when left for several hours in the cold, it is extremely hard to start and sometimes it won't start. Is there any way to insure the glow plugs are getting power, without removing the valve covers?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 16, 2009, 07:01 AM

    Read Sections 7 and 8 below:

    https://www.askmehelpdesk.com/cars-t...ml#post1415281
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ford Power stroke Losing Power [ 2 Answers ]

I have a 95 Power stroke 4x4 5 speed. When the truck is idling it runs pretty good, but when you drive it after so long, or come up to a corner it acts like it is missing and loses power so it barley wants to pull itself. Do you have any idea why,any suggestions would be very helpful. Thanks

Ford F-250 7.3 Power stroke glow plugs [ 6 Answers ]

:confused: How do I change the glow plugs in my 1999 Ford F-250, 7.3 Power Stoke?

F250 Power Stroke lacking power (sometimes) [ 1 Answers ]

My truck sometimes don't have the power it should when accellarating. Seems like a clogged fuel filter. It's not. Possily fuel pump? Which test should be done first, fuel pressure? What should it be before injector pump? Art

Power Stroke- power and smoke [ 2 Answers ]

I provided detailed info on the last question, but that question got lost in the system apparently. So briefly, I have a 2005 Power Stoke F-350. Loss of power and smoking. Had it in to the dealer 4 to 5 times... no resolution. I think it is the turbo. They replaced turbo parts and a sensor. It is...

Low power to glow bar [ 1 Answers ]

Have a goodman furnace that had a bad board I replaced the board but now there is only 14 volts to the glow bar and there should be 110. Could this be a ground problem or bad wiring

View more questions Search