Ask Experts Questions for FREE Help !
Ask
    Lamerguyer's Avatar
    Lamerguyer Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2012, 06:33 AM
    Goodman furnace GMS80703ANA
    Blower stays running, pilot comes on burner lights up and then 5-7 seconds later it cuts off. HELP PLEASE!!

Check out some similar questions!

Goodman furnace [ 0 Answers ]

2 and 3 blinks for 95% high efficiency Goodman furnace, normally open switch is stuck open, "pressure switch" problem is off and on...

Goodman furnace with 3 blinking lights and furnace has flame roll back [ 7 Answers ]

I have a GMNT-080-4B Some times I get a 3 blink light issue and then when it starts it has a flame roll back. Also I have to change the ignitor every year. Any help would be great

My Goodman GMP050 furnace's igniter won't shut off after the furnace cycles. Why? [ 0 Answers ]

On my 15 yr old Goodman GMP050, the preigniter stays hot orange even after the furnace cycles properly. I've sanded the flame sensor and the igniter but it still stays on till I shut off the electricity at the furnace. Any thoughts? It's COOOOOOLLLLLLDDDDDDDDD!

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Goodman furnace [ 1 Answers ]

Good man furn blinks 6 times No power at therm Blower runs

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.