Goodman furnace

lew4200 Posts: 1, Reputation: 1

New Member

Sep 30, 2009, 12:45 PM

Goodman furnace

Good man furn blinks 6 times
No power at therm
Blower runs

NorthernHeat Posts: 1,455, Reputation: 132

Ultra Member

Sep 30, 2009, 06:37 PM

Codes are usually explained on the blower door.

Add your answer here.

Check out some similar questions!

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Goodman Furnace [ 2 Answers ]

What does A three blink code on a Goodman 80 plus gas furnace mean

Goodman Furnace w/AC [ 1 Answers ]

I am replacing my 28 year old furnace with a Goodman furnace and an AC unit. Never had central air before. I have read conflicting reports on the quality of the Goodman line and wondering if I am making the right purchase. I am getting a 95% efficient, 90,000 BTU, 2 stage heating with a variable...

Goodman Furnace [ 3 Answers ]

I have a six year old Goodman Furnace that will not kick on or even begin the start up cycle. Last year I replaced the ignitor and checked it out today and looks fine. Any obvious place I should start to determine the issue? Thanks Jim

Goodman gas furnace [ 3 Answers ]

I have a goodman gas furnace, gms91155dxa for about a year. Recently I notice the furnace repeats on and off while it didn't reach at set temperature. After the heater is on, it runs some minutes and it shuts off itself. And the draft inducing motor runs, the ignitor is on and gas blows and in...