Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
     
    #1

    Dec 18, 2012, 05:04 AM
    Dryer Problem
    The GE repairman said I need an electrician. The breaker shows 240. Yet the outlet shows 110 for the red, but only 56 for the black. I wonder what that means.
    While the breaker and outlet are new. The wires are very old. The run is only
    About 5 feet to the breaker box. I wonder if he will fish the new wires, or install new conduit? Will cost, but has to be done.

    I know you told me so.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Dec 18, 2012, 06:28 PM
    Hello,

    You have not given us enough information. For example, what is the votage across both hot terminals in the receptacle?
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
     
    #3

    Dec 19, 2012, 04:46 AM
    Electrician finally found the problem with the dryer. The outlet reading was 110 red and 56 black. He found the problem in 1900 box(archaic term) bad spice job from before 1979.
    The wires were held together with an alligator clip. Now the hot terminals are 110 each.
    Cost me $129.00.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #4

    Dec 19, 2012, 06:34 AM
    "Bad splice job!" You are one lucky pastor to still have a church to worship in! Talk about an early Christmas Gift!

    It's about time, unless you are on a fiscal year budget, to redo you budget plans. You seriously need to consider finding the money to have all of the wiring and outlets checked for unsafe conditions. This is not something a DYI person can do. The NEC requires that a licensed electrician do the work in gathering facilities such as meeting halls, churches or movies.

    Please have this done as soon as possible.
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
     
    #5

    Dec 19, 2012, 06:54 AM
    Thanks a million

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Dryer Problem [ 4 Answers ]

Just got the brand new dryer. But is blowing cold air?

Dryer Problem [ 3 Answers ]

My dryer just stopped working today. The start button did make a funny noise yesterday when I went to use it and then today it won't work at all. It's like the motor just keeps running when you push the button in. Any help is great! Thanks,

Dryer problem [ 1 Answers ]

I have a problem I have never ran across before and hope someone can help. The heating element in my Amana dryer quit so I replaced it. Now I have another problem. The dryer heats up fine so I know the element is working but now my clothes take three hours to dry. Also, the inside of my dryer...


View more questions Search