Ask Experts Questions for FREE Help !
Ask
    timf's Avatar
    timf Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2012, 03:38 PM
    Bryant Plus 90 furnace blower issue
    I have the 350MAV036060 model gas furnace. The blower motor does not come on. LED gives code 12. There is only 1.5 volts coming off the "Heat" terminal when the motor should be running. Is this definitely a bad circuit board? Are they ever repairable? I find aftermarket boards for sale online at half the price of the OEM board. Has anyone installed one of those? Ist it worth the savings?

    Appreciate any help. Thanks.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Dec 17, 2012, 09:52 AM
    You need to test things with a meter and find out what is wrong. It may not be the circuit board as it rarely is the problem. You can even rewire it with a fan switch and fan relay and through the hi-limit and you are done. You do not even need the circuit board in some models, not all. The only function the circuit board has is fan control and sometimes the board controls safeties for the make-up combustion air and in that case you must have the board. See: https://dl.dropbox.com/u/8010163/AC%...20Diagrams.zip
    These are some wiring diagrams that may help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why? [ 0 Answers ]

Blower motor on all the time. No heat from furnace. Why?

Bryant furnace blower doesn't come on [ 0 Answers ]

When thermostat is turned up pilot ignites burners flame up an heat up but blower never comes on.blower wired directly works.thermostat cause burners to ignite.

Bryant Furnace Blower Motor Issue [ 4 Answers ]

Hello - I have a Bryant Mid Range Efficiency Furnace (395cav036055). The blower motor seems to be putting out too little air volume in heating mode. While the limit switch has not turned off the burners yet, it may just be a matter of time. (I do not smell any type of electrical type of burning...

Bryant Furnace Blower Motor Problems [ 1 Answers ]

I have a Bryant 80 furnace. As louck would have it the blower motor just went and of course it is within a year of the warranty expriing. Does this seem right?

Bryant Furnace - Blower not coming on [ 1 Answers ]

My blower fan will not come on. Bryant high efficiency furnace (approx 12 yrs old). I'm getting the 33 code on the LED, which means: limit or flame roll out switch is open. I've hit the re-set on the flame roll-out but, the blower still does not turn on. Any advice here?

View more questions Search