Ask Experts Questions for FREE Help !
Ask
    JKG0204's Avatar
    JKG0204 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 20, 2009, 12:56 PM
    Bryant Furnace Blower Motor Problems
    I have a Bryant 80 furnace. As louck would have it the blower motor just went and of course it is within a year of the warranty expriing. Does this seem right?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 20, 2009, 01:42 PM
    A electrical part can fail at any time.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace inducer motor blower keeps failing [ 34 Answers ]

I have a Bryant Plus 90 high efficiency furnace, Model 398A, about 14 years old. I am now on my third inducer motor assembly. The plastic blowers on the first two disintergrated. Does anyone have any idea as to why and what can be done to prevent another failure? Besides the inconvenience of no...

Bryant 90 Plus gas furnace blower motor [ 5 Answers ]

I have a Bryant 90 Plus (350MAV) and have a problem. I noticed that the heater was not turning on. I opened the furnace door and found the diagnostic led flashing 1-3. Upon checking the meaning of the code, I found it referenced a dirty filter of defective blower. I shut the furnace off at the...

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

Bryant furnace blower motor running, but not firing [ 3 Answers ]

What should I check to see why my gas furnace is not firing. I replaced the blower motor, which it is working also reset and then wired around the limit switch on the blower housing. Was working and firing furnace producing heat. Within one hour. Then the blower motor comes on, but the...

Bryant Blower Motor [ 3 Answers ]

I have a Bryant furnace that is 13 yrs. Old. I would like to take the blower motor out and replace it with a new model. Is there a correct way to remove the blower without tearing the whole furnace apart?

View more questions Search