Ask Experts Questions for FREE Help !
Ask
    kfrank's Avatar
    kfrank Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 3, 2012, 08:11 AM
    Bryant model 350mav plus 90
    Hello everyone,

    I have a Bryant Model 350 MAV 90 Plus installed in new construction in 2006. This season, it has an intermitant problem. The thermostat will "click" on and occasionally only cold air will flow out and the unit's igntion area as observed through the inspection window is dark. When it finally does ignite (sometimes hours later), you can easily see it is lit as observed through the inspection window. Typically, prior to warming up to the set temperature, the unit un-lights (but the blower continues to blow). If I lower the thermostat below the air temperature, the thermostat clicks off and the unit and blower stop running, as you would expect. The unit is propane powered through gas lines that service the entire neighborhood with tanks located on common property about 3/4's of a mile away.

    Any ideas before I call the HVAC tech? Many thanks!

Check out some similar questions!

Bryant 350mav [ 0 Answers ]

Is my Bryant Model 350MAV Furnace a Heaat Pump? I am replacing my thermostat and did not know which side to hook wires too?

Bryant plus 90 350mav code 34/14 [ 5 Answers ]

I have a Bryant 350mav that is giving a code 34 followed by a code 14 . I checked the intake and exhuast pipes and they are clear. What next? It is blowing cold air, cycles the 3 times and then locks again.

Bryant 90 plus model 350mav series d Buzz noise no blower turning [ 0 Answers ]

Woke up to a burning smell this morning so I went down stairs turned off the gas and power took off the main cover, took out the 2 screws to the lower cover, Depressed the lower cover button and then turned the power on... once I did that then shortly after a buzzing sound came from the blower...

Bryant 350mav igniter [ 1 Answers ]

I have a vintage Bryant 350 MAV that is temperamental. The gas will not ignite unless the igniter is in a perfect position. What is the "exact" igniter replacement part for this unit? BTW, all the items have been checked professionally, gas flow (in and out), gas pressure, air flow, air pressure,...

Bryant Model 350MAV Furnace [ 3 Answers ]

Hi, I recently had a furnace repairman in who told me our inducer on our Bryant Model 350MAV furnace needed to be replaced. He said the total cost would be $1075.00, including $890.00 for the inducer. This seemed high to me. Can anyone give me an idea of what this repair should have cost,...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.