Bryant 350mav

Check out some similar questions!

Bryant plus 90 350mav code 34/14 [ 5 Answers ]

I have a Bryant 350mav that is giving a code 34 followed by a code 14 . I checked the intake and exhuast pipes and they are clear. What next? It is blowing cold air, cycles the 3 times and then locks again.

Bryant Plus 90 350MAV - No heat in the morning [ 2 Answers ]

First post! All, I have a Bryant Plus 90 350MAV on propane. Yesterday I woke up to a 58degree house. Night/Morning temperature is set to be 65 degrees on digital thermostat. Thermostat stated "In Recovery" on display that morning and would not control the HVAC system even when elevating temp...

Bryant 350mav igniter [ 1 Answers ]

I have a vintage Bryant 350 MAV that is temperamental. The gas will not ignite unless the igniter is in a perfect position. What is the "exact" igniter replacement part for this unit? BTW, all the items have been checked professionally, gas flow (in and out), gas pressure, air flow, air pressure,...

Bryant 350MAV only runs in the mornings [ 6 Answers ]

Hi Everyone, I have a strange intermittent problem with my Bryant 350MAV furnace that has arisen in the last couple of months, since the weather started to cool here in Los Angeles. I usually turn off the thermostat at night when I go to bed, then manually turn on the heat in the morning when...

Bryant Model 350MAV Furnace [ 3 Answers ]

Hi, I recently had a furnace repairman in who told me our inducer on our Bryant Model 350MAV furnace needed to be replaced. He said the total cost would be $1075.00, including $890.00 for the inducer. This seemed high to me. Can anyone give me an idea of what this repair should have cost,...

View more questions Search

Check out some similar questions!

Add your answer here.