Ask Experts Questions for FREE Help !
Ask
    ViVid's Avatar
    ViVid Posts: 31, Reputation: 0
    Junior Member
     
    #1

    Nov 13, 2012, 08:32 PM
    1991 toyota 4x4 truck front end noise?
    Ive got a 91 toyota 4x4 with locking hubs, I got all new inner and outer bearings and new upper and lower ball joints from my mechanic because it was making a grinding noise on the front driver side. I thought it was the cv axels but my mechanic said there still good . It still makes the noise here and there but only when the hubs are locked in?? Any help would do p.s I live in Alaska and it seems to do it more in the cold(15 below)
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Nov 14, 2012, 09:46 AM
    See if this helps:

    . Change front differential fluid, using Mobil 1 SAE 75W-90 Synthetic Gear Lubricant.

    . Change transfer case fluid, using Mobil 1 Synthetic Multi-Vehicle ATF. If you have a manual transmission, use Mobil 1 SAE 75W-90 Synthetic Gear Lubricant.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toyota 1991 3.0 motor [ 0 Answers ]

Im having problems with my toyo 91 motor 3.0 because I can't find out how to check the fuel pump pression, I couldn't find the location to hook up the fuel pump tester, if anybody knows where is located the exact place to hook up the fuel pump tester Thanks

1991 Toyota Previa - Code 22? [ 0 Answers ]

I think my 1991 Toyota Previa is returning a code 22, but I am uncertain because when the check engine light flashes for the last time for the second digit the oil light also flashes at or near the same time. Does this mean something other than code 22?

Toyota 4 runner 1991 3.0 [ 3 Answers ]

I installed a new motor 1993 3.0 in my toyo 1991, but I having problems with it the problem is when It is cool It didn't start well until I press the gas pedal several times. after it runs OK I can start it without any problem, I would like to know what is causing the problem, Thanks

Toyota 1991 4 runner hesitation problems 3.0 [ 1 Answers ]

I have a toyo 91 4 runner motor 3.0 and I'd like to know what is the cause of this Problem I took off the intake chamber to replace a hose which is suppling the cold start injector but it started staling & hesitating a lot I did intalled a new intake manifold Gasket but I did take off the intake...

1991 toyota corolla 4afe [ 1 Answers ]

I have a 1991 toyota corolla 4 door sedan with a 4afe engine and a 5 speed standard transmission. I am trying to find out what make and model transmissiom that this car came with.


View more questions Search