Ask Experts Questions for FREE Help !
Ask
    aguilareal's Avatar
    aguilareal Posts: 31, Reputation: 1
    Junior Member
     
    #1

    Jan 21, 2011, 04:29 PM
    Toyota 1991 4 runner hesitation problems 3.0
    I have a toyo 91 4 runner motor 3.0 and I'd like to know what is the cause of this
    Problem I took off the intake chamber to replace a hose which is suppling the cold start injector but it started staling & hesitating a lot I did intalled a new intake manifold
    Gasket but I did take off the intake chamber again and I found a problem between the intake
    Chamber and intake manifold gasket there was a lot of fuel in 2 holes. Please tell me what
    Is causing this problem. Thanks
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
     
    #2

    Jan 21, 2011, 06:36 PM

    The cold start injector on these leak. Take it out again, leave the fuel line attached, place a rag under it, and let it sit several hours. The rag will be soaked with gas.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Problems with my toyota 1990 4 runner 3.0 [ 3 Answers ]

I have a big problem because it happened with my toyota 1990 4 runner motor 3.0 I was cleaning the fuel injectors and the fuel injector grommet was very worn so when Iwas to take off it broke by itself and a piece of it felt down into the grommet hole so my question is will there be any problem...

Toyota 4 runner no spark [ 8 Answers ]

Hi, have a 93 4 runner ,6 cyl. All of a sudden won't start. Good fuel replaced igniter and coil ,also coil wire still no spark help please . Thanks

Toyota 4 runner brakes [ 3 Answers ]

I changed the master in my 1997 toyota 4 runner and bleed the brakes and master cyclider and the brake petal still is soft when I brake please help!

1994 toyota 4-runner 3.0 v-6 [ 2 Answers ]

While driving around 50-55 mph the engine has a miss, and sometimes while idleing. I already tried fuel treatment and new plugs,oil changing. The engine does not loose any water or use any oil. Where should I start looking.:eek:


View more questions Search