Ask Experts Questions for FREE Help !
Ask
    aligray's Avatar
    aligray Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2012, 07:46 AM
    Boiler query
    Would you able to tell me if the type of boiler I have had installed is suitable for my needs please? I had a new bathroom installed 3 years ago and a new pump installed. It worked brilliantly. I then had an extension to my house built 2 years ago and they installed a Potterton gold combi 24HEa boiler and removed my pump. Since then my bathroom is next to useless as my shower is constantly scalding hot with little pressure and my bath is constantly lukewarm with little pressure from the taps. It has been suggested that my new boiler is unable to cope with the demands of the house but I am unsure what to think. I have an extended 3 bed semi which has 7 radiators, 2 heated towel rails, upstairs bathroom, ensuite downstairs bathroom, downstairs cloakroom, utility room and kitchen. Please would you be able to tell me whether the plumber who installed the new boiler got me the correct capacity for my usage? Thanks, Ali

Check out some similar questions!

Repco boiler model #LA150c pressue in boiler too high [ 1 Answers ]

Pressure rellief valvue was replaces a year ago for laking. Water pressue still reaching 40psi? Don't know why shoud be 30psi.. water still leaking off from the pressure relief valvue. I've tried to beeed oof water from the pressure relief valvue and the drain with n help. Pressuet still moves...

Spark ignition gas boiler Weil McLain pilot lights but boiler doesn't s [ 2 Answers ]

Spark ignition gas boiler. Weil McLain gas boiler. The pilot lights but the boiler doesn't start.

Is my hobart 600 a steam boiler or a hot water boiler. There is no circulator pump [ 0 Answers ]

I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.

Connecting a wood boiler to exsisting boiler [ 2 Answers ]

I need a plumbing diagram to connect a wood burning boiler to an exsisting primary boiler, exsisting boiler is apeerless 105/85 that is approx. 20 years old

DNS Query Query. A Query about DNS Queries... [ 12 Answers ]

I am a software developer, I don’t know much about networks. I have a working network but with one weird (well to me it’s weird) problem. If you can offer any insight I’ll be very grateful! <!--- Image Attachment Below (I couldn't find a way to paste it here in the editor :-( ) ---> ...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.