 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Payne gas heater blower will not stay on
My payne gas furnace blower will not stay running. When it comes on it will run for about 5 min then shut down. If I turn the furnace switch off then back on it will run then do the same thing again. Could it be a relay switch?
|
||||
Check out some similar questions!
My payne gas heater blower will run for about 5 min then shuts off. When I turn the heater off then back on at the switch it will run again and then do the same thing.
Sir Payne furnace t-stat about 34 years old. Pilot light is on but no blower or heat when t-stat is moved. Cleaned filtewr very well, cleaned t-stat, t stat has two yellow wires. Furnace has no switch but Plugged directly to an outlet. Please help. Thanks, ric
I have a payne furnace model PG8MAA036070AAJA I already removed the flame sensor and cleaned it. That did not help so I went on and bought another one and that still hasn't helped. So when you first get it going the burners only stay on for about 2-3minuutes and then turn back off. The house is...
I was cleaning the front. There are two wire connections. I think I pulled one of the wires out of one of the connections. The blower still goes but the thermostat doesn't give a flame since that wire became disconnected. Does it matter to which one of those wire connections I reconnect this...
Hi I have a Payne furnace model number 394jaw048080 the fan motor is so coroded that I canot read the name plate on the motor,I have found a motor number hc43ae115-----115 v-1075/rpm-10/370 cap,online giving my furnace model number,Will this be OK for my unit? Thank you for any help
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
