Check out some similar questions!
Payne heater light on no heater? Furnace about 34 years old
[ 0 Answers ]
Sir Payne furnace t-stat about 34 years old. Pilot light is on but no blower or heat when t-stat is moved. Cleaned filtewr very well, cleaned t-stat, t stat has two yellow wires. Furnace has no switch but Plugged directly to an outlet. Please help. Thanks, ric
Payne furnace won't stay lit
[ 1 Answers ]
I have a payne furnace model PG8MAA036070AAJA I already removed the flame sensor and cleaned it. That did not help so I went on and bought another one and that still hasn't helped. So when you first get it going the burners only stay on for about 2-3minuutes and then turn back off. The house is...
A wire came undone on my old payne heater. Blower goes but now no flame from t-stat
[ 0 Answers ]
I was cleaning the front. There are two wire connections. I think I pulled one of the wires out of one of the connections. The blower still goes but the thermostat doesn't give a flame since that wire became disconnected. Does it matter to which one of those wire connections I reconnect this...
Payne blower motor coroded
[ 0 Answers ]
Hi I have a Payne furnace model number 394jaw048080 the fan motor is so coroded that I canot read the name plate on the motor,I have found a motor number hc43ae115-----115 v-1075/rpm-10/370 cap,online giving my furnace model number,Will this be OK for my unit? Thank you for any help
Payne A/C and Heater
[ 1 Answers ]
I'm working on a a/c and heat unit that sit's on top of the roof. Before I replaced the old mercury t-stat the a/c functioned properly but the heater did'nt. I replaced the t-stat with a LUX 400 series low voltage t-stat, I have replaced the contacter in the unit along with the step down... View more questions Search
Add your answer here.
|