Ask Experts Questions for FREE Help !
Ask
    Timmytom's Avatar
    Timmytom Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2012, 02:27 PM
    Trane ex90 furnace burner will not ignite
    Furnace will not work, seems the electronic igniter is not lighting so nothing is happening but I did turn the A/C on and the blower motor and everything works fine for that. A red light is flashing on some panel not sure if that's normal though.

Check out some similar questions!

My burner won't ignite on my lennox furnace [ 1 Answers ]

Rheem furnace will ignite, but burner will only go on some of the time. [ 1 Answers ]

My Rheem Criterion model has stumped repair man. We have replaced the sensor, the gas valve and changed out a computer board. The heater will fire up some of the time. Most of the time it will go through the cycle of ignitor glow, burner kick on for a few seconds and go out, the blower works...

Furnace burner won't ignite [ 1 Answers ]

Furnace burner won't ignite only blows cold air,it has a electictic igniter

Trane xe 80 burner will not ignite [ 3 Answers ]

I have a forced hot air Trane xe 80 furnace. Electronic ignition. At times the burner will not ignite. The fan motor runs and only cold air is coming out. If I turn the furnace switch off then on again, it will glow and then the burner will ignite. This could last for days, then it will do it again.

Gas furnace burner won't ignite [ 5 Answers ]

I have a 26 year old Friedrich gas furnace model GHA075NDC that the burner will not ignite. The pilot is lit and I can turn the fan on, but the burner will not ignite. Can anyone help me solve this problem?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.