Ask Experts Questions for FREE Help !
Ask
    4DAFALLEN's Avatar
    4DAFALLEN Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 9, 2012, 07:05 AM
    Ritetemp 6022 rc wire connection
    Can I run the a c unit with the y wire hooked up to the r c connection for any period?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Sep 11, 2012, 06:43 PM
    Terminal RC is a power input terminal for cooling. Y is an output for the condensing unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

6022 ritetemp [ 3 Answers ]

What causes erratic operation of my 6022 ritetemp thermostat? I had a room temperature of 62 F, and setting of 80 F, and the thermostat would not call for heat.

Ritetemp 6022 [ 4 Answers ]

I am trying to install Ritetemp 6022 and replacing old thermostat. I have Y,O,G,W, C and R wires used in the old thermostat. All wires except R are on the 6022. Do I connect the R wire to RH or RC or another. Second what is the jumper configuration that I need

Ritetemp thermostat 6022 [ 0 Answers ]

I have a heat pump am attempting to hook up ritetemp 6022 thermostat the instructions are to hook g to g r to rh y to y w to o blue is not mentioned and these are the wires I have However when in the heating mode all workd good for heat but if I switch to cool it also works but when it...

Replace janitrol 18-60 thermostat with ritetemp 6022 [ 4 Answers ]

I'm trying replace janitrol 18-60 thermostat with ritetemp 6022 . System is 2 stage heatpump w/strip back-up Janitrol inside has 2 mercury switches and wires configured like this: Y G R O W2 E C W2 is white wire E is Black wire C is Blue wire...

Replace janitrol 18-60 thermostat with ritetemp 6022 [ 1 Answers ]

I'm trying to replace janitrol 18-60 thermostat with ritetemp 6022 Need help with wiring .

View more questions Search