Ask Experts Questions for FREE Help !
Ask
    spikesimpson's Avatar
    spikesimpson Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 10, 2009, 08:32 PM
    Replace janitrol 18-60 thermostat with ritetemp 6022
    I'm trying to replace janitrol 18-60 thermostat with ritetemp 6022
    Need help with wiring .
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 10, 2009, 09:05 PM
    Identify all wires you remove by color and where they were attached (IE letter on the old thermostat) to then using your instructions for your new thermostat wire it transposing the old wiring to the new thermostat using the identification you wrote down when removing the wires off the old thermostat. .
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blown Ritetemp 8050C thermostat [ 2 Answers ]

I have a 6 year old Trane heat pump air conditioning system and about 6 months ago added the Ritetemp 8050C thermostat. It worked flawlessly for 6 months then all of a sudden when I went to manually lower the temperature in cooling mode, the thermostat display and most of its functionality "blew"...

Changing Thermostat from Maple/Chase 09620 to Ritetemp 8022C [ 1 Answers ]

I am trying to change out my Maple/Chase 09620 programmable thermostat with a Ritetemp 8022C programmable thermostat. The Maple Chase has a wire to the E terminal, but there is no comparable terminal on the Ritetemp. The Maple/Chase terminals with corresponding wire colors are: C - Blue, L...

Ritetemp programmable thermostat room temperature! [ 1 Answers ]

My Ritetemp model 8035c thermostat all of a sudden stopped displaying current room temperature in the main screen (middle). It displays only C or F up to 0 degrees or 32 degrees now. Every time the heat comes on it continues to run unless I manually shut it off. I've tried resetting but no results....

Janitrol to ritetemp thermostat conversion [ 1 Answers ]

I am trying to install a ritetemp 8050C model thermostat to replace the Janitrol thermostat that came with my Goodman-Janitrol two-stage, heat pump system. There is an "E" terminal on the Janitrol unit (seven wires) but no corresponding terminal on the ritetemp unit(six wires). What is the...

View more questions Search