 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ritetemp thermostat 6022
I have a heat pump am attempting to hook up ritetemp 6022 thermostat the instructions are to hook g to g r to rh y to y w to o blue is not mentioned and these are the wires I have
However when in the heating mode all workd good for heat but if I switch to cool it also works but when it stops cooling there is a constant hum coming from the ac if I hook the wwire(white) to the w the cooling work OK no hum after shutting down but heat will not work until I replace the w ire back on the o terminal |
||||
Check out some similar questions!
I have a 6 year old Trane heat pump air conditioning system and about 6 months ago added the Ritetemp 8050C thermostat. It worked flawlessly for 6 months then all of a sudden when I went to manually lower the temperature in cooling mode, the thermostat display and most of its functionality "blew"...
I'm trying replace janitrol 18-60 thermostat with ritetemp 6022 . System is 2 stage heatpump w/strip back-up Janitrol inside has 2 mercury switches and wires configured like this: Y G R O W2 E C W2 is white wire E is Black wire C is Blue wire...
I'm trying to replace janitrol 18-60 thermostat with ritetemp 6022 Need help with wiring .
My Ritetemp model 8035c thermostat all of a sudden stopped displaying current room temperature in the main screen (middle). It displays only C or F up to 0 degrees or 32 degrees now. Every time the heat comes on it continues to run unless I manually shut it off. I've tried resetting but no results....
I am trying to install a ritetemp 8050C model thermostat to replace the Janitrol thermostat that came with my Goodman-Janitrol two-stage, heat pump system. There is an "E" terminal on the Janitrol unit (seven wires) but no corresponding terminal on the ritetemp unit(six wires). What is the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
