Ask Experts Questions for FREE Help !
Ask
    kirkwood2316's Avatar
    kirkwood2316 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 5, 2012, 10:51 PM
    Bulb
    Why is there lines in my panasonic 65 inch TV

Check out some similar questions!

Difference between g23 base bulb and gx23 base bulb [ 0 Answers ]

Is there a difference between G23 base and GX23 base UV light bulbs?

Correct voltage in light bulb socket, but bulb(s) won't light [ 1 Answers ]

Regarding a 4-light kit on a residential ceiling fan (Hampton Bay). 20 A circuit, nothing else on in circuit (house is vacant). No wall switch; all switching done at fan/light kit (separate pull chains). Fan turns fine. 122 VAC as measured w/ a Fluke meter within light bulb socket. Have...

Dry bulb and wet bulb temperature [ 1 Answers ]

Please let me know what is dry bulb and wet bulb temperature and how it is measured?

Upon installation of bulb, base of bulb burns and bulb never lights [ 1 Answers ]

Installed two new 3 bulb post lights on concrete entry piers, one bulb pops and burns the base immediately upon installation... I have checked the wiring and everything is wired correctly, I assume ths is a bad bulb socket and the fixture is defective, has anyone had this problem before?

Does removing one bulb from a two bulb flourecent unit reduce cost? [ 6 Answers ]

I am a General Manager for a company that has multiple large buildings. I have had it expressed to me by one of my investors that removing one of the two flourecent (32 Watt) bulbs from the unit will reduce cost by $30.00 a bulb a year! My simple understanding is that the ballast will run the same...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.