Check out some similar questions!
What is the difference between an a15 and an a19 lifght bulb?
[ 2 Answers ]
I know that the number in a15 and a19 light bulbs is the maximum diameter of the glass part of the bulb in 1/8 inch increments. However, what I need to know is what is the difference in the bases? Should the a15 and a19 bulbs fit the same socket? Thank You!
Dry bulb and wet bulb temperature
[ 1 Answers ]
Please let me know what is dry bulb and wet bulb temperature and how it is measured?
Upon installation of bulb, base of bulb burns and bulb never lights
[ 1 Answers ]
Installed two new 3 bulb post lights on concrete entry piers, one bulb pops and burns the base immediately upon installation... I have checked the wiring and everything is wired correctly, I assume ths is a bad bulb socket and the fixture is defective, has anyone had this problem before?
Does removing one bulb from a two bulb flourecent unit reduce cost?
[ 6 Answers ]
I am a General Manager for a company that has multiple large buildings. I have had it expressed to me by one of my investors that removing one of the two flourecent (32 Watt) bulbs from the unit will reduce cost by $30.00 a bulb a year! My simple understanding is that the ballast will run the same...
Dry laid Flagstone: sub-base only, or sub-base and base?
[ 1 Answers ]
Hi, I live in Northern VA and am installing dry laid 1.5" natural cleft flagstone on 4" of bluestone sub-base. I'd like this 500 sq ft. patio to last 20 years or more. My question: Is it overkill to add 2" of stonedust as a base on top of the bluestone sub-base, or is this unnecessary? If my... View more questions Search
Add your answer here.
|