Ask Experts Questions for FREE Help !
Ask
    flywheel46's Avatar
    flywheel46 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 4, 2012, 11:56 AM
    Goodman furnace orifice location model gmt070-3b
    Need to convert to lp but don't know where to find orifice location
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 4, 2012, 01:08 PM
    Need to convert to lp but don't know where to find orifice location


    You will need a lot more than just the orifice location. You will need special tools to set the gas pressure exactly to the specs the manufacturer supplies etc.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Sep 4, 2012, 02:35 PM
    Unless this is a dual fuel model, you will also need to replace the regulator and pilot orifice along with the main orifices too.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What size AC Ton (3-4) unit do I need for a Goodman GMT070-3 inside furnace [ 2 Answers ]

What size AC Ton unit do I need if I have a Goodman GMT070-3 furnace inside and how big can I go with the Outside AC Unit?

Goodman furnace problem model gmt070-3b fan does not kick on [ 0 Answers ]

Goodman furnace GMT070-3B [ 2 Answers ]

Home inspector found that the furnace does not have a bracket to hold the furnace filter in place. Is this normal? He is concerned it will be forced into the blower. Goodman furnace GMT070-3B

Have a 1999 Goodman GMT070-3B Heater and it hasn't been working prop Model GMT070-3B [ 0 Answers ]

Have a 1999 Goodman GMT070-3B Heater and it hasn't been working properly . After the initial start up of the heater the unit will ignite, once the blower engages the flame will go out and the blower will continue to run with no heat. I have replaced the Venter Pressure Switch which seemed to work...

Goodman GMT070-4B [ 1 Answers ]

My boyfriend recently unplugged our Goodman GMT070-4B to use the outlet, it has not worked since he plugged it back in. We followed the instructions several times to make it ignite and nothing is happening. The motor starts but nothing ignites and nothing clicks. Any insight is appreciated. We are...

View more questions Search