Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to wire pendant lights in tandem
[ 7 Answers ]
I have three pendant lights that I am installing over a counter, these are low voltage lights I believe because they have two black wires and a groud wire. I alread have a wire coming from the light switch which has a black, white and ground wires. How do I connect these three pendant lights in...
Track Lighting: 6 pendant lights/4 sections of track 2 lights not working?
[ 4 Answers ]
Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...
Wiring three pendant lights
[ 2 Answers ]
I am trying to wire in three pendant light fixtures into our new home above the breakfast bar. There are three junction boxes already wired in when we bought the house, but no lights. In the first two boxes there are two sets of wires coming out two black gromets. In each set of wires there is a...
Replacing a fluorescent light with recess lights
[ 4 Answers ]
I'm looking to replace my old ceiling fluorescent light with four recess lights. The current light is controlled by one switch and I'd like to control all four replacements lights with the same switch. Can you please advise me how to run the wires and how to connect them from one master switch...
Overhead Fluorescent Light Install
[ 1 Answers ]
Okay, I'm not an electrician but I thought I could do general stuff pretty well. I have a two bulb fluorescent light in the kitchen. I tried today to replace it and purchased a 4 light fluorescent. When I took the two light down, there was a two ground wires, two black, two white & two pink. ... View more questions Search
|