Ask Experts Questions for FREE Help !
Ask
    Sammybill's Avatar
    Sammybill Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 20, 2012, 12:39 AM
    Light fan switch wiring
    I am trying to wire up my bathroom light fan separately on two switches. Currently it is on one switch for both. I have a double switch with a c, 1,2 and loop. I have three whiite cables coming in with a black and white wire in each. The black are currently all joined together and there is one red in the 1 and the other two red are together in the c. How do I change the fan to the other switch?

Check out some similar questions!

Wiring a fan with light with a 3 speed switch [ 0 Answers ]

Need help asap please!! I need to connect a ceiling fan with light... on my wall switch I have a 3 speed and a light switch... in my wall switch I have 2 wires, which is black and red and then runs through that comes down through to the ceiling.. From the ceiling I have another set of 3 wires...

Wiring hunter fan and light /light to 3 way and fan to on off wall switch [ 4 Answers ]

I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...

Fan and light switch wiring [ 2 Answers ]

I am trying to wire a new Hunter 27183 dual sliding switch in my housem to control a fan an light unit. I am wiring the switch with a 14-2 wire coming in with power and a 14-3 wire going out to the fan and light. The switch has four wires coming from the back - Black, Blue, Red and Green. ...

Wiring ceiling fan switch and light switch [ 1 Answers ]

I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...

Wiring a 3 way switch to ceiling fan light [ 1 Answers ]

My pull chain to my ceiling fan light quite working. I got a new 3 way switch from HD. Forgot how the old switch was wired. From the ceiling fan I have a blue and a white wire and the switch has a red, blue and black and the light fixture has black and white. I have 5 white and 5 black on the...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.