 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring a fan with light with a 3 speed switch
Need help asap please!! I need to connect a ceiling fan with light... on my wall switch I have a 3 speed and a light switch... in my wall switch I have 2 wires, which is black and red and then runs through that comes down through to the ceiling..
From the ceiling I have another set of 3 wires which is red(active), green(ground) and black(neutral) On my fan/light I have a green(ground), brown(active), blue(neutral) and a white light active.. What wires do I connect to get it working as it should.. the D.I.Y manual doesn't explain much.. |
||||
Check out some similar questions!
I have installed a ceiling fan/light fixture, however, am not sure as how to wire the wall switch, specifically the wiring for the 5-speed fan control. I am able to get the light to work, but not the fan. Look forward to your replies. Thank you
Replacing: 3 speed pull chain ceiling fan switch- someone brilliant please tell me where Blue, Yellow,Black, and White go on the @#$% L,1,2,3 terminals . I am SO exasperated with trying just to find the info on-line. I have tried two- suggested configs. One hummed, one barely moved. Thank you in...
I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...
So here's my problem.. I moved into a new house to find out the fan switch on my ceiling fan is broke. I don't know the maker of the fan but I think I found a similar image of the fan (see below). There's 4 wires (black, purple, yellow, and orange) I would like to know the wiring configuration into...
Wire colors are: black, grey, green and brown
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
