 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring a 3 way switch to ceiling fan light
My pull chain to my ceiling fan light quite working. I got a new 3 way switch from HD. Forgot how the old switch was wired. From the ceiling fan I have a blue and a white wire and the switch has a red, blue and black and the light fixture has black and white. I have 5 white and 5 black on the light fixture. How do I wire this back properly. PLEASE HELP
|
||||
|
||||
|
Ok,
1. Blue from the fan to black from the switch. 2. Blue from the switch to black from whatever light sockets you want to turn on FIRST 3. Red from the switch to whatever light sockets you want to turn on SECOND 4. All whites together. Ceiling fan pull chain replacement and repair - Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I originally had two 48" fluorescent lamps in the kitchen. The ballasts have gone and I've taken this opportunity to put up a ceiling fan. I have two switches. One at each entry to the kitchen. The question is... When the original lighting was removed there were two different sets of wires,...
I just installed a new ceiling fan and want it to operate off an existing wall switch. The switch currently only operates a wall outlet in the same room. Apparently, the switch has no power, rather the power must be running to the wall outlet and then have a wire running to the switch. Is it...
I am trying to install a switch that controls both the ceiling fan with 3 speeds and a dimmer switch all in one unit for a hunter ceiling fan. At the wall switch there is a black wire which is always hot, a red and a ground. At the ceiling, where I removed a light fixture, there is a black, red,...
I just installed a new ceiling fan in a room where the switch previously controlled only an outlet and there was no power directly at the switch, only at the outlet. At the switch box I wired the two white wires together and then wired the black wires, one each, to the screws on the switch. The...
I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...
View more questions Search
|
