Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Remote Control Ceiling Fan wiring for a double wall switch
[ 5 Answers ]
I purchased a Hunter remote control ceiling fan. I've replaced fixtures before in my home, so I thought this would be a no brainer. Well the remote thing has me stumped. House is pre-wired with a double wall switch, one with a dial control for the fan, the other switch is for a wall outlet...
Replace a remote ceiling fan control with wall switch
[ 1 Answers ]
I have a hunter fan with remote control. The receiver has failed, can I remove the receiver and run the motor with 3 speed wall control. If so how do I wire the motor to ceiling wires without the receiver?
Converting remote control ceiling fan to 3-speed wall switch
[ 1 Answers ]
Customer has ceiling fan which is only remote control. We want to wire a wall 3-speed wall switch instead of the remote. The fan unit only has intrernal wiring for the remote use. It has 4 wires going to the motor for speed control. How do I connect these wires to a single incoming hot wire...
Installing wall remote for ceiling fan into wall switch
[ 3 Answers ]
I've had no luck with getting the wall remote on my Hampton Bay ceiling fan to work. I was able to get the fan to work with the wall switch, but once I change out the switch with the wall remote it doesn't work. The l.e.d. on the wall remote is not even lighting. There are 6 switches on the... View more questions Search
|