 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replace a remote ceiling fan control with wall switch
I have a hunter fan with remote control. The receiver has failed, can I remove the receiver and run the motor with 3 speed wall control. If so how do I wire the motor to ceiling wires without the receiver?
|
||||
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I purchased a Hunter remote control ceiling fan. I've replaced fixtures before in my home, so I thought this would be a no brainer. Well the remote thing has me stumped. House is pre-wired with a double wall switch, one with a dial control for the fan, the other switch is for a wall outlet...
Hi all, Current configuration: Wall switch that has 2 sliders, one for the fan (has multiple speed capability) and the other for the light (has dimming capability). Our wall slider switch looks like this one (but not this make/model), just for FYI: Hunter Fan/Light Dual Slide Preset Control -...
Customer has ceiling fan which is only remote control. We want to wire a wall 3-speed wall switch instead of the remote. The fan unit only has intrernal wiring for the remote use. It has 4 wires going to the motor for speed control. How do I connect these wires to a single incoming hot wire...
I've had no luck with getting the wall remote on my Hampton Bay ceiling fan to work. I was able to get the fan to work with the wall switch, but once I change out the switch with the wall remote it doesn't work. The l.e.d. on the wall remote is not even lighting. There are 6 switches on the...
I bought a hamilton bay ceiling fan equipped with a remote, Can I also install a Wall control unit to work with the remote? Are they compatible? Can they both be used with the same fan at the same time? (as long as they are on the same frequency?)
View more questions Search
|
