Ask Experts Questions for FREE Help !
Ask
    shelliwhite's Avatar
    shelliwhite Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 20, 2012, 09:37 PM
    Utilitech pressure tank
    We have a 45 gallon pressure tank and are not sure how much air to put in the bladder or bottom of it?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #2

    Jul 21, 2012, 06:23 AM
    Don't put any in the bottom. In the top, set the pressure to 2# BELOW the point at which the pump cuts on. So, for example, if the pump cuts on at 30#, you would set the pressure at 28#. Do this with the system off and pressure drained to zero by opening a low level faucet.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you adjust the pressure switch on a Utilitech 3/4hp Jet Pump? [ 6 Answers ]

I think I messed up the standard adjustment of the Utilitech Pump which is set at 20/40 from the factory. Now I can't get the pump to stay on since I adjusted it? Curious if anyone knew any tricks?

Utilitech pressure tank lpt36s [ 6 Answers ]

The builder installed a utilitech (mod# lpt36s) hydro-pneumatic pump pressure tank in our well sys. Does this pressure tank have a blader in it?

What is the air value on top of the tank for? Can you add more pressure to the tank.. [ 2 Answers ]

what is the air value on top of the tank for? Can you add more pressure (air) to the tank... and get more pressure out?

With the power turned off to water tank, tank loses pressure fast [ 0 Answers ]

Foot valve has been replaced but now pump won't shut off all the time. When you turn power off tank loses pressure instantly.

Do I need to install a jet pump, a pressure tank and a holding tank? [ 6 Answers ]

I have a new home with nothing but the 1inch well pipe stemed through the cellar wall. My house is not on town supply line. Do I need to install a jet pump that goes to the pressure tank which then sends water ot a holding tank? Or is the pressure tank by itself all that I would need? Or a...


View more questions Search