Ask Experts Questions for FREE Help !
Ask
    donb114's Avatar
    donb114 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 4, 2011, 12:06 PM
    what is the air value on top of the tank for? Can you add more pressure to the tank..
    what is the air value on top of the tank for? Can you add more pressure (air) to the tank... and get more pressure out?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    May 4, 2011, 01:04 PM

    Its used to adjust volume of the bladder inside the tank. Its not for adjusting the water pressure.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #3

    May 4, 2011, 06:18 PM

    The pressure at the top of the tank should be set to 2# BELOW the cut in pressure for the pump. For instance, if the pump cuts on at 30#, then you would set the pressure at the top of the tank to 28#. Do this with the system off and pressure drained to zero.

    Once set, don't change it. It is, as Smoothy pointed out, not there to adjust system pressure.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Steps to add air to well water pressure holding tank [ 7 Answers ]

My water tank is water logged and short cycling. I know I need to add air but I don't recall the exact steps and I don't want to damage the system. I think I have to turn off pump.. drain water until the tank is about half full and the air nozzle is above water level... use air pump to add air...

I have a aqua air pressure tank model number v45. What is the max air pressure [ 0 Answers ]

I have a aqua air v45 system. Im reading 50 psi but hardly have any pressure coming out. What can I do

Can I add any pressure assisted tank to a gravity toilet bowl? [ 1 Answers ]

Can I add any pressure assisted toilet tank to any gravity toilet bowl? Will the drain hole and bolt holes line up?

With the power turned off to water tank, tank loses pressure fast [ 0 Answers ]

Foot valve has been replaced but now pump won't shut off all the time. When you turn power off tank loses pressure instantly.


View more questions Search