 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Delay between air conditioning compressor and furnace fan
It seems that there is a noticeable delay between when the air conditioning compressor starts and when the furnace fan starts, I would say five or ten seconds. I don't recall it being this way. Is it normal, to allow the coils to cool before the airflow begins? Or is there a capacitor or something needing attention? (There is also a delay in the fan stopping after the compressor stops, presumably to dry the coils.)
My thermostat is a Lux TX9000TS programmable which has been giving problems by occasionally not kicking on the compressor or fan when demand temperature is reached and the cooling icon is flashing. I am currently watching how things are since I did a hardware and software reset on the thermostat. |
||||
Check out some similar questions!
Trying to wire a Honeywell fan center for an a/c on a wood electric furnace. The motor is a 220V with a switching relay. Does anyone have some input for this issue?
Fan is now turning after I nudged it with a screwdriver. However, air is not cooling.
The compressor motor and fan on my outside ac system will not turn off. I have tried switching my thermostat to heat, raising the temperature turning my thermostst to off... the blower inside the ouse will go off but the compressor fan outside stays on. The only way I can turn it off is to flip the...
I have an Amana Model RCE30A2B Compressor unit installed it is about 6 years old, the compressor will not cut in when demanded yet the cooling fan for the unit does
Hello thank you for taking the time to look/answer my question. That being said my problem is with a ac motor for a air compressor it worked fine then all of a sudden it started to throw the breaker. It will start and run fine for about 5-7 seconds then it will flip the breaker. Any advise will be...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
