Ask Experts Questions for FREE Help !
Ask
    breina1229's Avatar
    breina1229 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 9, 2012, 07:42 PM
    Kennmore 70 series seems to be working fine but clothes are still soaking wet
    In the process of trouble shooting I ran it empty and it agitates, spins and drains fine but if I put even a small load in the wash, when I go to take them out to put in the dryer they are still sopping wet.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 10, 2012, 01:37 AM
    Check these manuals and see if they help: https://dl.dropbox.com/u/8010163/Whi...%20Washers.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 90 plus series washer, won't spin on any cycle. Washes fine, empties fine [ 0 Answers ]

Just replaced the coupler on my kenmore 90 plus series washer, still won't spin on any cycle. Washes fine, empties fine just won't spin? Any ideas?

Clothes are soaking after spin cycle complete [ 0 Answers ]

Model # 23032100 Serial # CM1518780 I don't think that the clothes are spinning after washing. THe clothes are soaking wet, but the water has drained out, with clothes just laying , not up against walls. Clothes must be rung out by hand, after washer has stopped.

Kennmore 70 series washer [ 1 Answers ]

The bolt holding the agitator on is missing. I need to know size and thread, or local place to purchase one.

Kennmore 80 Series won't Spin [ 2 Answers ]

The washer works fine except for the following. The tub will not spin. It won't initiate the spin cycle by itself. If I spin the tub by hand, then the washer will complete the spin cycle successfully. The timer works fine and advances through all cycles including spin.

View more questions Search