Ask Experts Questions for FREE Help !
Ask
    washerwontspin50's Avatar
    washerwontspin50 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2007, 04:49 PM
    Kennmore 80 Series Won't Spin
    The washer works fine except for the following. The tub will not spin. It won't initiate the spin cycle by itself. If I spin the tub by hand, then the washer will complete the spin cycle successfully. The timer works fine and advances through all cycles including spin.
    washerwontspin50's Avatar
    washerwontspin50 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 29, 2007, 04:50 PM
    I think that the shifter is bad.
    applsvcgirl's Avatar
    applsvcgirl Posts: 112, Reputation: 9
    Junior Member
    		  
    #3

    Oct 29, 2007, 06:54 PM
    If it is a belt drive - I would say one of 2 this is bad either the wig wag (that is the real name) or more likely your pump pulley is going bad and sticking.
    If it is a direct drive - Sounds like the transmission is on the outs or you spin tube is dragging. If once it starts spinning it spins slow it's the transmission.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 80 Series washer doesn't spin... [ 1 Answers ]

I have a Kenmore 80 Series washing machine. Yesterday it stopped spinning. It fills up with water and then makes this fast clicking noise when it should start spinning or agitating. Any ideas on what might be the problem?:confused:

Kemore series 80 will not Spin or Agitate [ 9 Answers ]

Washer will not agitate or spin however water pump works fine - motor hums - checked lid switch OK.

Kenmore 90 Series Washer No Spin [ 2 Answers ]

I have a Kenmore 90 series washer about 6 years old that everything works fine but won't spin. It aggitates fine but won't spin. If you catch it before it spins and turn the dial back to aggitate and while it is aggitating you spin the tub backwards then go to spin it will spin just fine. I do know...

View more questions Search