Ask Experts Questions for FREE Help !
Ask
    mammame's Avatar
    mammame Posts: 2, Reputation: 1
    New Member
     
    #1

    May 25, 2009, 08:46 AM
    Kennmore 70 series washer
    The bolt holding the agitator on is missing. I need to know size and thread, or local place to purchase one.
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
     
    #2

    May 27, 2009, 10:33 PM

    mammame- go to this site <have the model number ready to give to them ::;;;;
    Parts and accessories/shop&findlawnandgarden,appliancespartsatsearsdirec t/searspartsdirect.com hope this helps you out :: if it don't <then find a appliance repair shop and talk to them <they may have one they can get off a washer that is only good for parts:: good luck and god bless ::f.b.e.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the capacity of my Kenmore 80 Series Washer & 90 Series Dryer? [ 1 Answers ]

We are trying to figure out what the capacity is of our Kenmore Washer and Dryer that we purchased over 10 years ago in Canada. I can't find it anywhere on the machine or manual. The Model # of the Kenmore 80 Series Super Capacity Plus Washer is 110.4784292, Serial #CH0802766. The model # of the...

Kennmore 70 Series washer lid removal [ 1 Answers ]

I have a Kennmore 70 washing machine. The spin/drain switch has broken. I need to know how to remove the top lid so that I can access the switch for removal & replacement. Thanks for the help in advance. Don

Kennmore 80 Series won't Spin [ 2 Answers ]

The washer works fine except for the following. The tub will not spin. It won't initiate the spin cycle by itself. If I spin the tub by hand, then the washer will complete the spin cycle successfully. The timer works fine and advances through all cycles including spin.


View more questions Search