Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hot cold water faucet handle is hard to turn
[ 0 Answers ]
I have a one handle bath tub water spout. The first part which is round turns the water on. Behind that is a handle that turns from cold to hot. That handle is turning hard. I have taken them off and there is a (looks like hex nut) on a pipe which goes into the wall. I do not know if that is...
Water in hot water heater won't heat. Cold water inlet won't turn off.
[ 3 Answers ]
I have a gas water heater built in 2007. The cold water supply won't turn off. Flushed the unit, burner and pilot fine. Called company (AO Smith) and they said I have a leak somewhere. However, the water meter is not turning. My question is where is the water from the tank going? I do not see...
Cold water leaks into hot water line
[ 4 Answers ]
I turn the cold water off at the water heater. When I open a hot water faucet there is cold water coming out. There shouldn't be any water coming out so it seems like there is a cross connection of some kind allowing cold water into the hot water lines.
Cold water in hot lines. If I turn the hot water supply off, I still get cold water
[ 1 Answers ]
I recently purchased a rental house. I replaced the hot water heater and shut off valves. With the shutt-off in and out of the tack are closed, I still get cold water from the hot side of all faucets in the house. When valves are open, and temp. Set at very hot, I get semi-hot water.
Kenmore 70, cold water faucet leaks
[ 8 Answers ]
I am so mad, its dripping all over the floor when I wash. I put some putty dope on it, and that just doesn't work. It makes a hissing sound like pressure is building up in it. The back of my washer is all rusty and I had to move it away from the wall. What the heck is going on. Thanks:( View more questions Search
|