 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hot cold water faucet handle is hard to turn
I have a one handle bath tub water spout. The first part which is round turns the water on. Behind that is a handle that turns from cold to hot. That handle is turning hard. I have taken them off and there is a (looks like hex nut) on a pipe which goes into the wall. I do not know if that is all one piece or not. How do I losen it so that the hot/cold will turn more easily. It just keeps breaking the handles.
|
||||
Check out some similar questions!
I must need a new pressure valve.. I don't have hot water side pressure, and I checked all other components. Can't find AquaSource faucet company - seems to be only bottled water, not shower fixtures... Anyone with experience in this area please help! Can't find new parts, etc.
I had a contractor here who shut off water temporarily, then turned it back on. All other faucets work fine. He says it's nothing he did. Help?
I've read the answers. This is not a new install. I've lived in the house 3 years now. Is it still the same problem with the "stem" and "o ring"? I've done other repairs but not this before.
Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
