 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Corroded cold water spigot
My cold water spigot for my washing machine is leaking. Looks like the washer needs to be replaced.
I cannot loosen the bolt to separate the assembly. I cannot loosen the screw for the handle either. Will heating the entire spigot help loosen the nut? I own a Presto-lite torch and a "B" tank. The unit is within 6 inches of the wall so I was considering a damp cloth. |
||||
Check out some similar questions!
Hi: I just had my house inspected and am trying to figure out whether I can fix this valve myself or not, or how much it will cost. It's a corroded shut off valve in the water heater closet. I've attached a picture. Thanks!
The waste water pipe from the wall is corroded and broken through. There is about an 1.5 sticking out. It looks like a flange is part of this pipe connection, I need to replace this pipe but I could not budge this with a pipe wrench. Is this a threaded pipe I can change or is this one piece of...
When I use my shower the water coming out of the spigot (or faucet) is scalding hot (as set by the temp control knob) but when I engage the shower the water coming out is only luke warm... what would cause this?! I have a modular home on a finished basement that was built in 1990... any thoughts?
Hi, I am looking for instructions or video to show me how to install a hot & cold water hose spigot or How to add hot water to my regular cold hose spigot?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
