Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I replaced pull switch lights with recess but the wall switch won't turn off the light
[ 2 Answers ]
I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...
I turn my start switch and my dryer will not stay on unless I tape my switch!
[ 0 Answers ]
I have a GE electric dryer. When I turn my rotary start switch my dryer starts up then once I release the switch my turns turns off. The heat works if I hold the switch. Which parts should I replace?
Pump pressure switch does not turn on with low pressure
[ 0 Answers ]
I lost water in my home overnight. The pressure gage reads about 8 PSI. If I use the lever on the pressure switch to close the contacts, nothing happens. Actually, the pump controller box, makes a buzzing sound for a couple of seconds, but that's it. Does anyone have any thoughts? I don't...
2 Ceiling fans on one switch - switch won't turn on or off
[ 5 Answers ]
I am more than boggled regarding our ceiling fan issues. We had an existing ceiling fan with light over our dining room table and have just installed another ceiling fan with light in our accompanying living room. There was never any lighting in our living room before now. We drilled a hole and...
Switch to turn off water pump once the tank if full
[ 1 Answers ]
We live on top of the hill. Water is pumped from down below. Our water pump stays on even after the tank is full. How can I make it turn off once the tank above is full? Are there pump switches that turn the pump off once the tank is full? View more questions Search
|