 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Armstrong air ultra v tech 80 6 5
I have a Armstrong ultra V tech 80. G1N80AU075D12A-2. It is about 6 years old. The filter is clean, the flame sensor is clean, and the vacuum line/ fitting is clear. I have gas because other appliances are functioning just fine. I turn up the thermostat and it performs a purge as normal for about 15 seconds. The ignitor then comes on and shortly thereafter the flame (gas) comes on and it lights momentarily and goes out (only about 1 second of flame) It then goes into lock out with a 6 then 5 flash which tells me the gas (flame) should not have occurred. Please help, and thank you
|
||||
Check out some similar questions!
Armstrong air ultra v tech 80 filter bracket
[ 0 Answers ]
Armstrong ultra V tech 80
[ 0 Answers ]
When furnace comes on it does not reach desired temp.then cuts off a couple of minutes then reignites it repeats this cycle multiple times then finally cuts off,replaced control limit switch ran fine for about 1 1/2 weeks now its doing it again.any help would be appreciated
Armstrong Ultra V Tech 80 Filter change
[ 3 Answers ]
Where is the filter located for an Armstrong Ultra V Tech 80 furnace? How often should it be changed? This is a forced hot air system. Also has central air. Can they be purchased locally ie: Home Depot or Lowe's? Tha nk you.
Adding a Humidifier to a Armstrong Air Ultra V Tech 80
[ 1 Answers ]
I am installing an Aprilaire Humidifier 500a on an Armstrong Air Ultra V Tech 80 furnace. Where do I get the 24 VAC from the heating side of the furnace to feed the humidifier control?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
