 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Armstrong ultra V tech 80
When furnace comes on it does not reach desired temp.then cuts off a couple of minutes then reignites it repeats this cycle multiple times then finally cuts off,replaced control limit switch ran fine for about 1 1/2 weeks now its doing it again.any help would be appreciated
|
||||
Check out some similar questions!
Armstrong Air Ultra V, 4 yrs old: Problem: *Igniter comes on with bright red/blue flame *Burners then come on *Fan blower comes on *Shortly after blower comes on, burners go out, and blower continues to run *Igniter comes back on *Burners then come back on *Then Burners go out again...
My armstrong Ultra V Tech 80 furnace suddenly doesn't want to ignite. Please bear with me as I don't know a whole lot about furnaces. I can hear and see the gas come on, but it does not ignite. I can hear a clicking noise I assume is the ignitor trying to engage, but the furnace doesn't start. It...
I was wondering what the color code was for the r1 resistor... my was a little burnt and I can't tell what the proper color code is.
Where is the filter located for an Armstrong Ultra V Tech 80 furnace? How often should it be changed? This is a forced hot air system. Also has central air. Can they be purchased locally ie: Home Depot or Lowe's? Tha nk you.
I am installing an Aprilaire Humidifier 500a on an Armstrong Air Ultra V Tech 80 furnace. Where do I get the 24 VAC from the heating side of the furnace to feed the humidifier control?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
