 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a piggy back washing machine, gas, when i turn the washing machine on, the water just keeps going, doesn't stop, water all over my floor, the washer will not go on hot water even though i do have it and the hot and cold is on, just keeps coming out cold water, when the machine spins, goes so fast then starts banging against the side of the machine... can you tell me if it can be fixed or just buy a new one.
|
||||
Check out some similar questions!
I just replaced the hot/cold water valve in my Kenmore 70 Series Heavy Duty Plus washer model no. 82372110. I had one wire in the wiring harness, small, left over and couldn't find where to attach it. The washer fills fine with cold water but takes in no hor water. All lines and hoses are new...
We were told that is some sort of "energy saving" feature. Is there a way around this?
Just replaced hot water heater. Hot water is great, but not running to washer. Did I miss turning a knob
No hot water is coming into my washer. I have checked the filters, confirmed that the water hose is on correctly and the hot water is turned on. The washer on fills with cold water, not warm or hot.
Hi, When I turn on the washer all I get is a dribble when I am in the hot /warm mode the water is cold... cold water pressure is fine and when I use the warm cool mode pressure is also fine but only cold water comes out... do I need a new washer or is this something I can fix myself. It is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
