Ask Experts Questions for FREE Help !
Ask
    donnybrook04's Avatar
    donnybrook04 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 19, 2008, 06:35 AM
    No hot water in Kenmore 70 Series washer
    I just replaced the hot/cold water valve in my Kenmore 70 Series Heavy Duty Plus washer model no. 82372110. I had one wire in the wiring harness, small, left over and couldn't find where to attach it. The washer fills fine with cold water but takes in no hor water. All lines and hoses are new and clear. Am I correct in assuming if I can find where to attach the wire my problem will be solved? Where do I attach it?
    VIII2368's Avatar
    VIII2368 Posts: 10, Reputation: 2
    New Member
    		  
    #2

    Dec 19, 2008, 07:36 AM
    The water valve takes two set of quick disconnect cold water y-r/w hot water br-r/w there should not be any loose wire. Check your water temp. switch.
    donnybrook04's Avatar
    donnybrook04 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 19, 2008, 09:49 AM

    I found it and machine is working perfectly. Thanks!!
    cuppajojo's Avatar
    cuppajojo Posts: 1, Reputation: 1
    New Member
    		  
    #4

    May 5, 2013, 02:04 PM
    My Kenmore heavy duty 70 series model #82874120 no longer fills with hot water. It fills fine on cold and warm but will not switch over to hot. I used to be able to find a "sweet spot" where I could get it to switch over to hot, but no longer. What should I check first?

    Thanks!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washer (series 80) won't fill with water [ 5 Answers ]

Starts, stops, spins, and flushes out water appropriately - but won't let water in, neither hot nor cold, on any program / cycle. Any ideas? Need to fix it myself to keep housepeace...

View more questions Search