Ask Experts Questions for FREE Help !
Ask
    Dave1717's Avatar
    Dave1717 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2011, 04:54 AM
    We bought a new washer. Why is the 'hot' water setting not real HOT?
    We were told that is some sort of "energy saving" feature. Is there a way around this?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jan 23, 2011, 11:19 AM
    Up to 90 percent of the cost of washing clothes comes from heating the water, so use hot water only for very dirty clothes, and always use cold water in the rinse cycle. Newer Energy Star appliances sense the needs and adjust the water temp. No easy way around this issue.



    Dave1717's Avatar
    Dave1717 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 26, 2011, 04:14 AM
    Comment on ma0641's post
    Suppose I WANT to use hot water?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Jan 26, 2011, 12:18 PM
    Depending on the make and model, you may not have that option. I know it's not a perfect solution for everyone but Big Brother made some decision. Only alternative would be to get water from another source, bathtub, sink etc and pour it in first.
    Dave1717's Avatar
    Dave1717 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jan 26, 2011, 01:57 PM
    Comment on ma0641's post
    Big Brother can stay out of my life for a change.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #6

    Jan 26, 2011, 03:54 PM
    Comment on ma0641's post
    I agree.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hot Water heater setting for vacation [ 23 Answers ]

I'd like to thank Tom for his answer to my first question, and ask one more. If I turn my hot (gas) water heater to "pilot" will it be on the lowest setting or do I have to turn the temp. knob down as well... also will it be OK if I have turned the water off at the Main?

Reset my hot water heater from vacation setting. [ 3 Answers ]

My hot water heater is a Gas heater made by State. It went to vacation mode yesterday and I followed instructions to reset it to normal range but it would not go. What could be the possible solution.

Hot water heater vacation setting [ 3 Answers ]

I have an electric hot water heater and turn it off when I am away for 2 months. But what about 2 weeks, 6 days, or? What is the cut-off point (i.e. how many days) when it will take more energy to heat the water again than it does to leave it on? Many thanks! Sally

How Do I Set the Hot and Cold Water Setting on My Shower Valve? [ 2 Answers ]

I have installed a new handle on my shower at home. However, when I turn the handle to the left - the water is cold. When I turn the handle to the right - the water is hot. I have a Moen shower system. Can anyone help me so that the hot water is activated by turning to the left and the cold...

Vacation hot water heater setting [ 6 Answers ]

I'll be away from my house for several months. I will shut off the main water supply to the house while away. Should I use the Vacation setting on my hot water heater or turn it off entirely?

View more questions Search