Murray 18.5 twin

alanq64 Posts: 1, Reputation: 1

New Member

Apr 25, 2012, 02:38 PM

Murray 18.5 twin

The only way I can keep it running is at full choke. I've changed the gas, cleaned the air filter. What else can I do?

ballengerb1 Posts: 27,378, Reputation: 2280

Home Repair & Remodeling Expert

Apr 25, 2012, 04:34 PM

Clean the carb bowl and needle.

Add your answer here.

Check out some similar questions!

Murray Lawn Tractor 46" V Twin OHV (older model 465603x92) [ 0 Answers ]

I cannot get this mower to release out of park. I noticed it was sticking when I would park it to pick up limbs, etc while using it. Now it will not budge out of park at all. Everything else is OK.

Murray select 20 HP twin 46 [ 1 Answers ]

When I try to start I get no starter with a known good battery. I replaced the solenoid and still nothing. Then I realized that when I turned the switch (ignition) I did not get lights in the first position like you are supposed to. It appears the only remaining possibiltiy is the switch. I should...

Murray sel etc twin auto riding lawn mower [ 2 Answers ]

Murray sel etc twin auto riding lawn mower 2000 - 2001 doesn't want to start I have put new spark plugs took battery in for testing and that is good when I turn the key it does nothing tried jump starting nothing what else can I do before taking it in if there is anything else I can try

Murray Mower 42" Twin Select w/ Briggs 42a707, Solenoid just clicks [ 2 Answers ]

Murray 42" Twin Select Briggs 42a707 16.5hp Motor OK, I am not on my mower at the moment, obviously, but I will post more model numbers and such this afternoon. History. 1. Wife picks house with monster lawn. 2. Wife pisses on my plan for a new riding mower. 3. Neighbor has pity and...

Murray/Briggs 17hp twin problem [ 1 Answers ]

My Murray has a 17hp Briggs I/C twin engine (42A707) that starts right up, cuts fine, but will not re-start if you shut it off. I have new spark plugs, new armature, and a good battery. When I go to re-start it, the engine just spins. I smell gas coming out of the exhaust, but I have worn out...