Ask Experts Questions for FREE Help !
Ask
    wcand's Avatar
    wcand Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 30, 2010, 03:39 PM
    Murray select 20 HP twin 46
    When I try to start I get no starter with a known good battery. I replaced the solenoid and still nothing. Then I realized that when I turned the switch (ignition) I did not get lights in the first position like you are supposed to. It appears the only remaining possibiltiy is the switch. I should at least have lights with a good battery.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Sep 30, 2010, 05:32 PM

    Have you checked the inline fuse ? That's what it sounds like
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray Mower 42" Twin Select w/ Briggs 42a707, Solenoid just clicks [ 2 Answers ]

Murray 42" Twin Select Briggs 42a707 16.5hp Motor OK, I am not on my mower at the moment, obviously, but I will post more model numbers and such this afternoon. History. 1. Wife picks house with monster lawn. 2. Wife pisses on my plan for a new riding mower. 3. Neighbor has pity and...

Murray/Briggs 17hp twin problem [ 1 Answers ]

My Murray has a 17hp Briggs I/C twin engine (42A707) that starts right up, cuts fine, but will not re-start if you shut it off. I have new spark plugs, new armature, and a good battery. When I go to re-start it, the engine just spins. I smell gas coming out of the exhaust, but I have worn out...

Murray Select 12HP 2-3-4-5 gear issues! [ 2 Answers ]

Hello... I have a Murray select 12hp 30inch riding mower that starts and runs perfectly but when I engage the mower into any gear past first, it will not move at all and just sits still. The blade engages correctly and cuts great, but I don't want to make an all day job cutting my grass in first...

Murray select model 405000x8f [ 1 Answers ]

Murray select lawn tractor will turn over when I try to start it, but will not start up.

12.5 murray select riding mower will not crank [ 2 Answers ]

I tried to crank my riding mower with no luck. I turn the key and nothing happens. Not even a clicking noise from the solenoid. I have replaced the solenoid, key switch, and both of the safety switches. It still won't turn over. The blades are disengaged and I push in the clutch brake. Please...

View more questions Search