My burner won't ignite on my lennox furnace

ljsljs Posts: 1, Reputation: 1

New Member

Feb 3, 2011, 04:40 PM

My burner won't ignite on my lennox furnace

T-Top Posts: 1,871, Reputation: 100

Ultra Member

Feb 3, 2011, 06:17 PM

Lennox has many furnaces out in production and out of production. A model# of the furnace will help us help you.

Add your answer here.

Check out some similar questions!

Rheem furnace will ignite, but burner will only go on some of the time. [ 1 Answers ]

My Rheem Criterion model has stumped repair man. We have replaced the sensor, the gas valve and changed out a computer board. The heater will fire up some of the time. Most of the time it will go through the cycle of ignitor glow, burner kick on for a few seconds and go out, the blower works...

Furnace burner won't ignite [ 1 Answers ]

Furnace burner won't ignite only blows cold air,it has a electictic igniter

Lennox furnace won't ignite [ 3 Answers ]

Lennox mod GZ4m3/4-120A-4 Ser 6395M52686 12/95 Board LED shows firing sequence, Gas valve opens, igniter doesn't spark, gas valve closes approx 8 sec. later then retries twice more. The furnace can be ignited with lighter during this sequence and appears to burn normally for approx 8 min....

Gas furnace burner won't ignite [ 5 Answers ]

I have a 26 year old Friedrich gas furnace model GHA075NDC that the burner will not ignite. The pilot is lit and I can turn the fan on, but the burner will not ignite. Can anyone help me solve this problem?

Lennox G12 Furnace won't ignite [ 1 Answers ]

Hello, I have problems with my Furnace. I currently have a Lennox G12RD2-82-3 from 1980. Last week I replaced the furnace blower but now the furnace won't ignite. These are the conditions: --the pilot is always on -- I have replaced the thermocouple --the thermostat is OK --the blower kicks on...