Ask Experts Questions for FREE Help !
Ask
    dave12j0x2y0's Avatar
    dave12j0x2y0 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2012, 01:15 PM
    Mtd 760 lawn tractor
    The spring broke on the shift lever and I replaced it, now it stalls when I put it in reverse
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 22, 2012, 10:43 AM
    Hi,
    Need more than just 760 since just the most superficial searches yielded 4 possibilities. Try the numbers under the seat beginning with 13.
    Peace,
    Clarke
    dave12j0x2y0's Avatar
    dave12j0x2y0 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 22, 2012, 11:58 AM
    Hi, the number is 13A3761G500, thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Apr 22, 2012, 04:02 PM
    Hi,
    Did find a breakdown for 13A3761G700 which should be the same since only the vendor number changed. It is a pdf for easy printing. See at:
    http://www.outdoordistributors.com/p...700_(2005).pdf
    And try to pick out the spring.
    Does sound to me as if you attached the reverse safety lockout for reverse(yellow wire.)
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mtd transmatic lawn tractor model 760 [ 2 Answers ]

I have a MTD model 760-779 transmatic lawn tractor. Last year the ignition switch stopped working or rather when you turned it to start it wouldn't do anything. I was able to bypass it and jump the starter directly and get it to start but this year it just turns over when I jump the starter and...

Were is oil filter on 2005 mtd lawn tractor, hydrostatic lawn tractor [ 1 Answers ]

Were is the oil filter located on a mtd hydrostatic lawn tractor.

MTD 18.5 lawn tractor [ 0 Answers ]

Hello - I have an MTD 18.5 horse lawn tractor. I can drop the blades to about the second notch and it runs fine. If I drop them any lower the machine cuts off.. Does anyone know why this is happening? Is there a switch on the unit that I can replace? Regards George

Bilens lawn tractor models 760-779 [ 1 Answers ]

I have a problem with the deck it won't stay level when u put it on the lower cutting levels it rips into the dirt on the one side I have dropped the deck off and replaced the blades the mower is new the deck dropps the whole way to the ground on the one side I looked on where the rails come down...

Mtd lawn tractor [ 3 Answers ]

I have an MTD lawn tractor seems to act like it is sliping if forward gear I have repaced the belt. Does not do this in reverse. Could it be the transmission is that rebuildable?

View more questions Search