 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
MTD 18.5 lawn tractor
Hello - I have an MTD 18.5 horse lawn tractor. I can drop the blades to about the second notch and it runs fine. If I drop them any lower the machine cuts off.. Does anyone know why this is happening? Is there a switch on the unit that I can replace? Regards George
|
||||
Check out some similar questions!
Greetings, I have a 1991 MTD lawn tractor 18hp w/46" deck, 6 speed, low and high range. Over the past year 1st through 4th won't move tractor forward and I have to use position 5 or 6. Is this a problem with the trans or a drive belt problem? The only belts that have ever been changed are the deck...
Have an MTD Lawn Tractor Yard Machine that will not get gas. If you put gas in the carborator it runs but as soon as that gas is gone it quits. Does this mower have a fuel pump? Model 14AS820H352. I think it is a 2002 model:)
I have a mtd lawn tractor 38" 7 speed 12hp briggs & strattion eng model# 130-650f I am having a problem that when you put it in the forward position and release the cluch it pops out of gear but when you put it in reverse it stays in gear. I change the transmission belt but it is still doing the...
I am trying to remove the steering shaft 'y from my tractor but I am having a hard time loosening the hex bolt from underneath. I am using a Hex wrench and it's just to tight to come off. Any suggestions would be helpful.
Have lawn tractor with briggs. Only get a click when trying to start. Replaced battery, same result.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
