Ask Experts Questions for FREE Help !
Ask
    punxyguy's Avatar
    punxyguy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2007, 09:40 PM
    Bilens lawn tractor models 760-779
    I have a problem with the deck it won't stay level when u put it on the lower cutting levels it rips into the dirt on the one side I have dropped the deck off and replaced the blades the mower is new the deck dropps the whole way to the ground on the one side I looked on where the rails come down from the lever to the deck. The one side is one the metal guide and the other side is off it by a 1/4 in. I can't seem to figure it out any help or suggestion would be great
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Aug 14, 2007, 07:27 PM
    Not real sure of what you are saying here, but check for broken hanger brackets, or cables.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn tractor [ 1 Answers ]

I have 1982 murray lawn tractor 11/36 I need a drive belt diagram where can I find one

Lawn tractor [ 2 Answers ]

I Have A Sears Tractor With A 12HP Briggs Motor the Discharge Light is on Battery is Full Charged and when it is running I have 13.6 volts into the battery if it sits it will not start

Mtd lawn tractor [ 3 Answers ]

I have an MTD lawn tractor seems to act like it is sliping if forward gear I have repaced the belt. Does not do this in reverse. Could it be the transmission is that rebuildable?

Tractor lawn mower [ 2 Answers ]

Hi I have a Wizard lawn mower with a Briggs & Stratton engine that was ran with low oil I don't know much about engines but when I stripped it the piston arm has sheared at the end I can't see any other damage so my problem is I need to replace the piston but I can't see any no on the piston all I...

View more questions Search